PX6 TOUCH PRO-A | AUTOMATIC COMPRESSION TESTER FOR CYLINDERS and BLOCKS TO COMPLY WITH ASTM C140 and ASTM C39
PX6 TOUCH PRO-A automatic compression tester are to test concrete blocks specimens size maximum 500 x 300 mm and cylinders up to 6 in x 12 in (150x300 mm).
PX6 TOUCH PRO-A offers new features and capabilities to the user by facilitating use in concrete compression tests to be performed by a quality control test laboratory.
The machines consist of equipped with a premium heavy-duty spherical ball seat and 310x410x90 mm (12.2”x16.1”x3.5”) rectangular plates for testing blocks according to ASTM C140 and ASTM C1314. Traceable certificate of surface hardness available on request.
Necessary accessories for testing cylinders up to 6″ x 12″ (150x300 mm) in accordance with ASTM C39 and AASHTO T-22 are sending upon customer request.
For easy removal and repositioning of the upper block test platen and the spherical ball seating assembly, the compaction machine frame is equipped with a rail system. Thanks to the rail system, the user can easily change the platen.
Safety Features
Machines have sending together with max. pressure valve to avoid machine overloading, piston travel limit switch, emergency stop button, front door and rear transparent fragment guard.
Features:
• Highly accurate DC motor technology quietly and efficiently delivers super accurate load control at both low-speed and low-loads.
• PX6 TOUCH PRO-A automatic compression testers can be used for blocks testing to ASTM C140 and cylinders to ASTM C39.
• The integrated control system features an intuitive 7” color graphical display, which works like a tablet or smart-phone, and makes PX6 TOUCH PRO-A quick and simple to operate.
• Hardware and firmware are in total compliance with all the main international concrete testing standards including ASTM C39, ASTM C140, AASHTO T22 and EN 12390-3.
• The system is available in multiple languages English, French, Spanish, Russian and is fully compatible with non-Latin characters for Russian, Ukrainen.
51-AWB47660 and 51-AWB47670 model PX6 TOUCH PRO-A supplied complete with following accessories;
• Spherical seat with ball seating assembly and rectangular platens 310x410x90 mm (12.2 in x 16.1 in x 3.5 in) for testing.
• Distance piece dia. 7.7 in x1.6 in height (dia.195x40 mm height)
• Distance piece dia. 7.7 in x2 in height (dia. 195x50 mm height)
• Distance piece dia. 7.7 in x2.7 in height (dia.195x68 mm height)
• Distance piece dia. 7.7 in x4 in height (dia. 195x100 mm height)
• Piston
• Automatic Hydraulic Power Pack (7 in touch screen control and data acquisition unit)
• Software for computer. Moreover smartphones and tablet pc for upon customer request.
• Front door and rear transparent fragment guard.
PROFIX6 Plus touch control unit is designed to perform automatically compression, flexure and splitting tensile strength tests of construction materials such as concrete, cement mortar, masonary units and blocks by controlling the compression machines.
All the operations of PROFIX6 Plus Touch are controlled from the front panel touch screen display.
PROFIX6 Plus Touch Control Unit has easy to use menu options.It displays all menu option listings simultaneously, allowing the operator to access the required option in a seemless manner to activate the option or enter a numeric value to set the test parameters.
Features for PROFIX6 PLUS LCD Data Acquisition Control System
• Digital graphic display is able to draw real-time "Load vs. Time", or "Stress vs. Time" graphics. Provides precise calibration with multi-point calibration (up to 10 points).
• Different menu languages can be selected via the device via language support. ( English, Spanish, French, Russian)
• USB communication signal output (communicates with computers)
• 2 each RS 232 serial communication signal outputs (communicates with computers)
• Connects to local networks and the Internet with Ethernet 10/100 network connection output (optional)
• Connects to portable devices via Bluetooth wireless connection (optional)
• 500 test results can be stored in internal memory. Due to the SD (memory) card connection, a large number of test results can be stored in the device memory (40,000 test results).
• Setting and calibration menus are password protected and prevent unauthorized use.
• The device can switch between one-touch load and deformation control modes.
• The industrial standard operates with 24 VDC supply voltage. Built-in voltage filter and regulator protects against input signal fluctuations
• Sensor modules are compatible with loadcell (load cell), pressure sensor (4-20 / 0-20 mA), potentiometric distance sensors, strain washers, thermocouples and all kinds of mV output sensors.
Product Model | 51-AWF48060 & 51-AWB48062 | 51-AWF48070 & 51-AWB48072 |
---|---|---|
Capacity kN (lbf) | 2000 kN (450,000 lbf) | 3000 kN (675,000 lbf) |
Max vertical daylight, mm (inches) | 300 mm (11.8in) | 260 mm (10.2in) |
Horizontal Daylight, mm (inches) | 370 mm (14.6in) | 370 mm (14.6in) |
Piston Diameter, mm (inches) | 266.7 mm (10.5in) | 317.5 mm (12.5in) |
Max. Piston Travel, mm (inches) | 63.5 mm (2.5in) | 63.5 mm (2.5in) |
Platen Dimensions, mm (inches) | 310 x 410 x 90 mm (12.2in x 16.1in x 3.5in) | 310 x 410 x 90 mm (12.2in x 16.1in x 3.5in) |
Platen Surface Hardness | 55.5 HRC (600 HV) | 55.5 HRC (600 HV) |
Platens Flatness Toll, mm | 0.05 mm | 0.05 mm |
Oil Capacity | 12 liters (6.3 gallons) | 12 liters (6.3 gallons) |
Overall Dimensions, mm | 865 x 520 x 1550 mm (34.25in x 20.47in x 61in) | 890 x 520 x 1600 mm (35in x 20.47in x 63in) |
Weight approx., kg (lbs) | 850 kg (1,870 lbs) | 950 kg (2,160 lbs) |
Product Model | Product Name |
---|---|
51-AWB48060 | Automatic Concrete Compression Testing Machine, 2000 kN (450,000 lbf) Capacity for Testing Blocks to ASTM C140 and Cylinders up to 6in x 12in, 220-240 V 50-60 Hz |
51-AWB48062 | Automatic Concrete Compression Testing Machine, 2000 kN (450,000 lbf) Capacity for Testing Blocks to ASTM C140 and Cylinders up to 6in x 12in, 110-120 V 60 Hz |
51-AWB48070 | Automatic Concrete Compression Testing Machine, 3000 kN (660,000 lbf) Capacity for Testing Blocks to ASTM C140 and Cylinders up to 6in x 12in, 220-240 V 50-60 Hz |
51-AWB48072 | Automatic Concrete Compression Testing Machine, 3000 kN (660,000 lbf) Capacity for Testing Blocks to ASTM C140 and Cylinders up to 6in x 12in, 110-120 V 60 Hz |
Standards: ASTM C39 | AASHTO T22 | ASTM C140