PX6 TOUCH PRO | FOUR COLUMN AUTOMATIC COMPRESSION TESTER FOR CUBES AND CYLINDERS

Product Code
51-FC478
Quantity in Stock
Conctact with us
Standards
ASTM C39 | ASTM C469 | AASHTO T22 | EN 12390-3, 12390-4 | BS 1881

PX6 TOUCH PRO model four column automatic compression testers designed for perform compression strength tests according ASTM C39, AASHTO T22, EN 12390-3, 12390-4 and BS 1881 of testing 100mm to 200 mm dimensions concrete cubes and 100 mm to 160 mm diameter cylinder specimens.

PX6 TOUCH PRO model four column automatic compression testers for concrete cylinders are produced from 2000 kN to 3000 kN capacity. With the PX6 TOUCH PRO model concrete compression testing machines are the classification of concrete samples according to their compressive strength properties can be done safely and easily.

PX6 TOUCH PRO models four column compression testing machines are consist of a high stiffness welded frame tested for stability to ASTM C39, AASHTO T22, EN 12390-3, 12390-4 and BS 1881, automatic hydraulic power pack with data acquisition and control system PROFIX6 Plus.

Safety Features
Machines have sending together with max. pressure valve to avoid machine overloading, piston travel limit switch, emergency stop button, front door and rear transparent fragment guard.

Power Pack Features:
• Highly accurate DC motor technology quietly and efficiently delivers super accurate load control at both low-speed and low-loads.
• PX6 TOUCH PRO automatic compression testers can be used for cylinders and cubes to ASTM C39, AASHTO T22, EN 12390-3, 12390-4 and BS 1881.
• The integrated control system features an intuitive 7 in color graphical display, which works like a tablet or smart-phone, and makes PX6 TOUCH PRO quick and simple to operate.
• Hardware and firmware are in total compliance with all the main international concrete testing standards including ASTM C39, AASHTO T22, EN 12390-3, 12390-4 and BS 1881.
• The system is available in multiple languages English, French, Spanish, Russian and is fully compatible with non-Latin characters for Russian, Ukrainen.

PX6 TOUCH PRO supplied complete with following accessories for ASTM Standards (for Model 51-FCA47880 and 51-FCA47890);
• Spherical seat with ball seating assembly and upper platen dia.165×30 mm (6.5 in x1.2 in) for testing.
• Lower platen dia. 250×30 mm (9.8 in x 1.2 in) for testing.
• Distance piece dia. 7.7 in x1.6 in height (dia.195x40 mm height)
• Distance piece dia. 7.7 in x2 in height (dia. 195x50 mm height)
• Distance piece dia. 7.7 in x2.7 in height (dia.195x68 mm height)
• Distance piece dia. 7.7 in x4 in height (dia. 195x100 mm height)
• Piston
• Automatic Hydraulic Power Pack (7 in touch screen control and data acquisition unit)
• Software for computer. Moreover smartphones and tablet pc for upon customer request.
• Front door and rear transparent fragment guard.

PX6 TOUCH PRO supplied complete with following accessories for EN Standards (for Model 51-FCE47860 and 51-FCE47870);
• Spherical seat with ball seating assembly and upper platen diameter 300 mm for testing.
• Lower platen dia. 300 mm for testing.
• Distance piece dia. 200x30 mm height
• Distance piece dia. 200x50 mm height
• Distance piece dia. 200x68 mm height
• Distance piece dia. 200x100 mm height
• Piston
• Automatic Hydraulic Power Pack (7 in touch screen control and data acquisition unit)
• Software for computer. Moreover smartphones and tablet pc for upon customer request.
• Front door and rear transparent fragment guard.

PROFIX6 Plus touch control unit
PROFIX6 Plus touch control unit is designed to perform automatically compression, flexure and splitting tensile strength tests of construction materials such as concrete, cement mortar, masonary units and blocks by controlling the compression machines.
All the operations of PROFIX6 Plus Touch are controlled from the front panel touch screen display.

PROFIX6 Plus Touch Control Unit has easy to use menu options.It displays all menu option listings simultaneously, allowing the operator to access the required option in a seemless manner to activate the option or enter a numeric value to set the test parameters.

Features for PROFIX6 PLUS LCD Data Acquisition Control System
• Digital graphic display is able to draw real-time "Load vs. Time", or "Stress vs. Time" graphics. Provides precise calibration with multi-point calibration (up to 10 points).
• Unit selection (kN, ton, lbf)
• Different menu languages can be selected via the device via language support. ( English, Spanish, French, Russian)
• USB communication signal output (communicates with computers)
• 2 each RS 232 serial communication signal outputs (communicates with computers)
• Connects to local networks and the Internet with Ethernet 10/100 network connection output (optional)
• Connects to portable devices via Bluetooth wireless connection (optional)
• 500 test results can be stored in internal memory. Due to the SD (memory) card connection, a large number of test results can be stored in the device memory (40,000 test results).
• Setting and calibration menus are password protected and prevent unauthorized use.
• The device can switch between one-touch load and deformation control modes.
• The industrial standard operates with 24 VDC supply voltage. Built-in voltage filter and regulator protects against input signal fluctuations
• Sensor modules are compatible with loadcell (load cell), pressure sensor (4-20 / 0-20 mA), potentiometric distance sensors, strain washers, thermocouples and all kinds of mV output sensors.

Product Model 51-FCE47860 51-FCE47870 51-FCA47880 51-FCA47890
Standards EN EN ASTM, AASHTO ASTM, AASHTO
Capacity 2000 kN 3000 kN 2000 kN (450,000 lbs) 3000 kN (660,000 lbs)
Upper Platen Diameter 300 mm 300 mm 165×30mm (6.5inx1.2in) 165×30mm (6.5inx1.2in)
Lower Platen Diameter 300 mm 300 mm 300×50mm (11.8inx2in) 300×50mm (11.8inx2in)
Max Vertical Daylight 340 mm (14.7in) 340 mm (14.7in) 375 mm (14.7in) 375 mm (14.7in)
Max. Horizontal Clearance 360 mm (10.4in) 425 mm (10.4in) 350 mm (13.8in) 370 mm (14.6in)
Ram Diameter 250 mm 300 mm 266.7mm (10.5in) 317.5mm (12.5in)
Piston Stroke 50 mm 50 mm 63.5mm (2.5in) 63.5mm (2.5in)
Platen Hardness 55.5 HRC (600 HV) 55.5 HRC (600 HV) 55.5 HRC (600 HV) 55.5 HRC (600 HV)
Platens Flatness Toll. 0.05 mm 0.05 mm 0.05 mm 0.05 mm
Fluid Reservoir Capacity 12 liters (6.3 gallons) 12 liters (6.3 gallons) 12 liters (6.3 gallons) 12 liters (6.3 gallons)
Overal Width 850 mm 980 mm 850 mm (33.4 in) 980 mm (38.5 in)
Overall Depth 550 mm 680 mm 550 mm (21.6 in) 680 mm (26.8 in)
Overall Height 1500 mm 1550 mm 1500 mm (59 in) 1550 mm (61in)
Overall Weight 830 kg 1070 kg 800 kg (1,820 lbs) 1030 kg (2,345 lbs)
Product Model Product Name
51-FCE47860 Automatic Compression Tester with 2000 kN Capacity to comply with EN 12390-4 for cylinders up to 160 x 320 mm and cubes up to 200 mm - 220-240 V 50-60 Hz
51-FCE47870 Automatic Compression Tester with 3000 kN Capacity to comply with EN 12390-4 for cylinders up to 160 x 320 mm and cubes up to 200 mm - 220-240 V 50-60 Hz
51-FCA47880 Automatic Compression Tester with 2000 kN (450,000 lbf) Capacity to comply with ASTM C39 for 4" and 6" cylinders - 220-240 V 50-60 Hz
51-FCA47882 Automatic Compression Tester with 2000 kN (450,000 lbf) Capacity to comply with ASTM C39 for 4" and 6" cylinders - 110-120 V 60 Hz
51-FCA47890 Automatic Compression Tester with 3000 kN (660,000 lbf) Capacity to comply with ASTM C39 for 4" and 6" cylinders - 220-240 V 50-60 Hz
51-FCA47892 Automatic Compression Tester with 3000 kN (660,000 lbf) Capacity to comply with ASTM C39 for 4" and 6" cylinders - 110-120 V 60 Hz

Standards: ASTM C39 | ASTM C469 | AASHTO T22 | EN 12390-3, 12390-4 | BS 1881

px6 touch pro-e en four column automatic compression tester for cubes and cylinders 51-FC478 PROFIX6 px6 touch pro-e en four column automatic compression tester for cubes and cylinders
PROFIX6