PX6 TOUCH PRO-E | AUTOMATIC COMPRESSION TESTER FOR CUBES AND CYLINDERS TO COMPLY WITH EN 12390-4 and EN 12390-3

Product Code
51-EWC479
Quantity in Stock
Conctact with us
Standards
EN 12390-3, 12390-4 | BS 1881 | TS EN ISO 7500

PX6 TOUCH PRO-E model EN automatic compression testers designed for perform compression strength tests according EN 12390-3, 12390-4 and BS 1881 of testing 100mm to 200 mm dimensions concrete cubes and 100 mm to 160 mm diameter cylinder specimens.

PX6 TOUCH PRO-E model EN automatic compression testers for concrete cylinders are produced from 1500 kN to 3000 kN capacity. With the PX6 TOUCH PRO-E model concrete compression testing machines are the classification of concrete samples according to their compressive strength properties can be done safely and easily.

PX6 TOUCH PRO-E models EN compression testing machines are consist of a high stiffness welded frame tested for stability to EN 12390-3, 12390-4 and BS 1881, automatic hydraulic power pack with data acquisition and control system PROFIX6 Plus.

Safety Features
Machines have sending together with max. pressure valve to avoid machine overloading, piston travel limit switch, emergency stop button, front door and rear transparent fragment guard.

Power Pack Features:
• Highly accurate DC motor technology quietly and efficiently delivers super accurate load control at both low-speed and low-loads.
• PX6 TOUCH PRO-E automatic compression testers can be used for cylinders and cubes to EN 12390-3, 12390-4 and BS 1881.
• The integrated control system features an intuitive 7 in color graphical display, which works like a tablet or smart-phone, and makes PX6 TOUCH PRO-E quick and simple to operate.
• Hardware and firmware are in total compliance with all the main international concrete testing standards including EN 12390-3, 12390-4 and BS 1881.
• The system is available in multiple languages English, French, Spanish, Russian and is fully compatible with non-Latin characters for Russian, Ukrainen.

PX6 TOUCH PRO-E supplied complete with following accessories;
• Spherical seat with ball seating assembly and upper platen diameter 300 mm for testing.
• Lower platen dia. 300 mm for testing.
• Distance piece dia. 200x30 mm height
• Distance piece dia. 200x50 mm height
• Distance piece dia. 200x68 mm height
• Distance piece dia. 200x100 mm height
• Piston
• Automatic Hydraulic Power Pack (7 in touch screen control and data acquisition unit)
• Software for computer. Moreover smartphones and tablet pc for upon customer request.
• Front door and rear transparent fragment guard.

PROFIX6 Plus touch control unit
PROFIX6 Plus touch control unit is designed to perform automatically compression, flexure and splitting tensile strength tests of construction materials such as concrete, cement mortar, masonary units and blocks by controlling the compression machines.
All the operations of PROFIX6 Plus Touch are controlled from the front panel touch screen display.

PROFIX6 Plus Touch Control Unit has easy to use menu options.It displays all menu option listings simultaneously, allowing the operator to access the required option in a seemless manner to activate the option or enter a numeric value to set the test parameters.

Features for PROFIX6 PLUS LCD Data Acquisition Control System
• Digital graphic display is able to draw real-time "Load vs. Time", or "Stress vs. Time" graphics. Provides precise calibration with multi-point calibration (up to 10 points).
• Unit selection (kN, ton, lbf)
• Different menu languages can be selected via the device via language support. ( English, Spanish, French, Russian)
• USB communication signal output (communicates with computers)
• 2 each RS 232 serial communication signal outputs (communicates with computers)
• Connects to local networks and the Internet with Ethernet 10/100 network connection output (optional)
• Connects to portable devices via Bluetooth wireless connection (optional)
• 500 test results can be stored in internal memory. Due to the SD (memory) card connection, a large number of test results can be stored in the device memory (40,000 test results).
• Setting and calibration menus are password protected and prevent unauthorized use.
• The device can switch between one-touch load and deformation control modes.
• The industrial standard operates with 24 VDC supply voltage. Built-in voltage filter and regulator protects against input signal fluctuations
• Sensor modules are compatible with loadcell (load cell), pressure sensor (4-20 / 0-20 mA), potentiometric distance sensors, strain washers, thermocouples and all kinds of mV output sensors.

Product Model 51-EWC47915 51-EWC47920 51-EWC47930
Capacity 1500 kN 2000 kN 3000 kN
Standards EN EN EN
Upper Platen Diameter 300 mm 300 mm 300 mm
Lower Platen Diameter 300 mm 300 mm 300 mm
Max Vertical Daylight 340 mm 340 mm 340 mm
Max. Horizontal Clearance 320 mm 360 mm 425 mm
Ram Diameter 200 mm 250 mm 300 mm
Piston Stroke 50 mm 50 mm 50 mm
Platen Hardness 55.5 HRC (600 HV) 55.5 HRC (600 HV) 55.5 HRC (600 HV)
Platens Flatness Toll. 0.05 mm 0.05 mm 0.05 mm
Fluid Reservoir Capacity 12 liters 12 liters 12 liters
Overal Dimensions 750x520x1250 mm 800x520x1500 mm 925x550x1550 mm
Overall Weight 580 kg 800 kg 1050 kg
Product Model Product Name
51-EWC47915 Automatic Compression Tester with 1500 kN Capacity to comply with EN 12390-4 for cylinders up to 160 x 320 mm and cubes up to 200 mm - 220-240 V 50-60 Hz
51-EWC47920 Automatic Compression Tester with 2000 kN Capacity to comply with EN 12390-4 for cylinders up to 160 x 320 mm and cubes up to 200 mm - 220-240 V 50-60 Hz
51-EWC47930 Automatic Compression Tester with 3000 kN Capacity to comply with EN 12390-4 for cylinders up to 160 x 320 mm and cubes up to 200 mm - 220-240 V 50-60 Hz

Standards: EN 12390-3, 12390-4 | BS 1881 | TS EN ISO 7500

px6 touch pro-e en automatic compression tester for cubes and cylinders 51-EWC479 PROFIX6 px6 touch pro-e en automatic compression tester for cubes and cylinders
PROFIX6